View LSGT676-P7R-1N7P9-24_8878589.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lsg t676 hyper multi topled ? hyper-bright led lead (pb) free product - rohs compliant 2012-04-20 1 besondere merkmale ? geh?usetyp: wei?es p-lcc-4 geh?use, farbloser klarer verguss ? besonderheit des bauteils: beide leuchtdiodenchips getrennt ansteuerbar, hohe signalwirkung durch farbwechsel der led m?glich ? wellenl?nge: 633 nm (super-rot), 570 nm (grn) ? abstrahlwinkel: lambertscher strahler (120) ? technologie: ingaalp ? optischer wirkungsgrad: 7 lm/w (super-rot), 5 lm/w grn ? gruppierungsparameter: lichtst?rke, wellenl?nge ? verarbeitungsmethode: fr alle smt-bestcktechniken geeignet ? l?tmethode: reflow l?ten und wellenl?ten (ttw) ? vorbehandlung: nach jedec level 2 ? gurtung: 8-mm gurt mit 2000/rolle, ?180 mm oder 8000/rolle, ?330 mm ? erweiterte korrosionsfestigkeit: details siehe seite 9 anwendungen ? optischer indikator ? einkopplung in lichtleiter ? hinterleuchtung (lcd, schalter, tasten, displays, werbebeleuchtung, allgemeinbeleuchtung) features ? package: white p-lcc-4 package, colorless clear resin ? feature of the device: both chips can be controlled separately, high signal efficiency possible by color change of the led ? wavelength: 633 nm (super-red), 570 nm (green) ? viewing angle: lambertian emitter (120) ? technology: ingaalp ? optical efficiency: 7 lm/w (super-red), 5 lm/w (green) ? grouping parameter: luminous intensity, wavelength ? assembly methods: suitable for all smt assembly methods ? soldering methods: reflow soldering and ttw soldering ? preconditioning: acc. to jedec level 2 ? taping: 8 mm tape with 2000/reel, ?180 mm or 8000/reel, ?330 mm ? superior corrosion robustness: details see page 9 applications ? optical indicators ? coupling into light guides ? backlighting (lcd, switches, keys, displays, illuminated advertising, general lighting)
2012-04-20 2 lsg t676 anm.: die oben genannten typbezeichnungen umfassen d ie bestellbaren selektionen. diese bestehen aus wen igen helligkeitsgruppen (siehe seite 5 fr n?here informationen). es wird nur eine einzig e helligkeitsgruppe pro gurt und farbe geliefert. z.b.: lsg t676 -p7r- 1+n7p9-24 bedeutet, dass auf dem gurt nur eine der helligkeitsgruppen p7, p9, q, q5, q7, q9 oder r fr super-red enthalten ist. um die liefersicherheit zu gew?hrleisten, k?nnen ei nzelne helligkeitsgruppen nicht bestellt werden. gleiches gilt fr die farben, bei denen wellenl?nge ngruppen gemessen und gruppiert werden. pro gurt wi rd nur eine wellenl?ngengruppe geliefert. z.b.: lsg t6 76-p7r-1+n7p9 -24 bedeutet, dass auf dem gurt nur eine der wellenl?ngengruppen -2, -3, oder -4 enthalten i st (siehe seite 5 fr n?here information). lsg t676-p7r- 1 +n7p9-24 bedeutet, dass das bauteil innerhalb der a uf seite 4 spezifizierten grenzen geliefert wird. um die liefersicherheit zu gew?hrleisten, k?nnen ei nzelne wellenl?ngengruppen nicht bestellt werden. note: the above type numbers represent the order gro ups which include only a few brightness groups (see page 5 for explanation). only one group per color will be shipped on each reel (there will be no mixing of t wo groups per color on each reel). e.g. lsg t676 -p7r -1+n7p9-1 means that only one group p7, p9, q, q5, q7, q9 or r for super-red will be shippable for any one reel and color. in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength gro ups are measured and binned, single wavelength grou ps will be shipped on any one reel. e.g. lsg t676-p7r- 1+n7p9 -24 means that only 1 wavelength group -2, -3 or -4 will be shippable. lsg t676-p7r- 1 +n7p9-24 means that the device will be shiped withi n the specified limits as stated on page 4 . in order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). bestellinformation ordering information typ type emissionsfarbe color of emission lichtst?rke 1) seite 16 luminous intensity 1) page 16 i f = 20 ma i v (mcd) bestellnummer ordering code color 1 color 2 lsg t676- p7r-1+n7p9-24 super-red / green 56.0 ...180.0 35.5 ...100.0 q65111a1615
lsg t676 2012-04-20 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol werte values einheit unit super red green betriebstemperatur operating temperature range t op C 40 + 100 c lagertemperatur storage temperature range t stg C 40 + 100 c sperrschichttemperatur junction temperature t j + 125 c durchlassstrom forward current ( t a =25c) i f 30 ma sto?strom surge current t 10 m s, d = 0.005, t a =25c i fm 1 0.5 a sperrspannung 3) seite 16 reverse voltage 3) page 16 ( t a =25c) v r 12 v leistungsaufnahme power consumption ( t a =25c) p tot 80 mw w?rmewiderstand thermal resistance sperrschicht/umgebung 4) seite 16 1 chip on junction/air 4) page 16 2 chips on sperrschicht/l?tpad 1 chip on junction/solder point 2 chips on r th ja r th ja r th js r th js 580 790 340 470 k/w k/w k/w k/w
2012-04-20 4 lsg t676 kennwerte characteristics ( t a = 25 c) bezeichnung parameter symbol symbol werte values einheit unit super red green wellenl?nge des emittierten lichtes (typ.) wavelength at peak emission i f = 20 ma l peak 645 572 nm dominantwellenl?nge 5) seite 16 dominant wavelength 5) page 16 i f = 20 ma l dom 633 6 570* C4/+5 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 20 ma dl 16 22 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 j 120 120 grad deg. durchlassspannung 6) seite 16 (min.) forward voltage 6) page 16 (typ.) i f = 20 ma (max.) v f v f v f 1.8 2.0 2.3 1.8 2.0 2.4 v v v sperrstrom (typ.) reverse current (max.) v r = 12 v i r i r 0.01 10 0.01 10 m a m a temperaturkoeffizient von l peak (typ.) temperature coefficient of l peak i f = 20 ma; C10c t 100c tc l peak 0.14 0.12 nm/k temperaturkoeffizient von l dom (typ.) temperature coefficient of l dom i f = 20 ma; C10c t 100c tc l dom 0.05 0.10 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 20 ma; C10c t 100c tc v C 2.0 C 2.6 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 20 ma h opt 7 5 lm/w * einzelgruppen siehe seite 5 individual groups on page 5
lsg t676 2012-04-20 5 floating bins super-red p7 = 56 ... 90 [mcd] p9 = 63 ... 100 [mcd] q = 71 ... 112 [mcd] q5 = 80 ... 125 [mcd] q7 = 90... 140 [mcd] q9 = 100 ... 159 [mcd] r = 112 ... 180 [mcd] floating bins green n7 = 35.5 ... 56 [mcd] n9 = 40 ... 63 [mcd] p = 45 ... 71 [mcd] p5 = 50 ... 80 [mcd] p7 = 56 ... 90 [mcd] p9 = 63... 100[mcd] wellenl?ngengruppen (dominantwellenl?nge) 5) seite 16 wavelength groups (dominant wavelength) 5) page 16 gruppe group green einheit unit min. max. 2 566 569 nm 3 569 572 nm 4 572 575 nm gruppenbezeichnung auf etikett group name on label beispiel: q5-1 + p5-4 example: q5-1 + p5-4 helligkeitsgruppe brightness group (super red) wellenl?nge (keine gruppierung) wavelength (no grouping) (super-red) helligkeitsgruppe brightness group (green) wellenl?nge wavelength (green) q5 1 p5 4 anm.: in einer verpackungseinheit / gurt ist immer n ur eine helligkeitsgruppe pro farbe enthalten. note: no packing unit / tape ever contains more than one brightness group for each color.
2012-04-20 6 lsg t676 relative spektrale emission 2) seite 16 relative spectral emission 2) page 16 v( l ) = spektrale augenempfindlichkeit / standard eye r esponse curve i rel = f ( l ); t a = 25 c; i f = 20 ma abstrahlcharakteristik 2) seite 16 radiation characteristic 2) page 16 i rel = f ( j ); t a = 25 c ohl01900 400 0 20 40 60 80 100 450 500 550 600 650 700 nm % i rel l v l super-red green 0 0.2 0.4 1.00.8 0.6 j 1.0 0.8 0.6 0.4 0? 10? 20? 40? 30? ohl01660 50?60? 70? 80? 90? 100? 0? 20? 40? 60? 80? 100? 120?
lsg t676 2012-04-20 7 durchlassstrom 2) seite 16 forward current 2) page 16 i f = f ( v f ); t a = 25 c relative lichtst?rke 2) 7) seite 16 relative luminous intensity 2) 7) page 16 i v / i v(20 ma) = f ( i f ); t a = 25 c relative lichtst?rke 2) seite 16 relative luminous intensity 2) page 16 i v / i v(25 c) = f ( t j ); i f = 20 ma ohl01901 10 -1 v 0 10 1 10 10 2 5 5 ma 5 1.5 f v f i 1.7 1.9 2.1 2.3 2.6 super-redgreen ohl03884 (20 ma) v v i i i f 10 0 5 10 1 10 ma 2 -1 1010 -2 10 0 1 10 5 5 green super-red t ohl01903 0 v (25 ?c) i -20 0 20 40 60 ?c 100 j 0.4 0.8 1.2 1.6 2.0 i v super-red super-red green green
lsg t676 2012-04-20 8 maximal zul?ssiger durchlassstrom max. permissible forward current i f = f ( t ) zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c super red maximal zul?ssiger durchlassstrom max. permissible forward current i f = f ( t ) ohl01075 0 0 20 40 60 80 ?c 100 t i f 5 10 15 20 25 30 35 2 chips on 1 chip on temp. ambient t a ohl00318 f i 10 10 -5 -4 -3 10 10 -2 10 -1 10 0 s 10 1 10 2 p t 0.050.5 0.2 0.1 d 0.02 0.01 0.005 = -2 10 -1 10 0 10 55 a d t t = p t t p i f ohl01072 0 0 20 40 60 80 ?c 100 t i f 5 10 15 20 25 30 35 2 chips on 1 chip on t s temp. solder point
lsg t676 2012-04-20 9 ma?zeichnung 8) seite 16 package outlines 8) page 16 korrosionsfestigkeit besser als en 60068-2-60 (meth od 4): mit erweitertem korrosionstest: 40c / 90%rh / 15pp m h2s / 336h corrosion robustness better than en 60068-2-60 (met hod 4): with enhanced corrosion test: 40c / 90%rh / 15ppm h2s / 336h gewicht / approx. weight: 35 mg marking package gply6837 2 3 4 1 0.8 (0.031)0.6 (0.024) 2.6 (0.102) 2.1 (0.083) 2.3 (0.091) 3.0 (0.118) 3.4 (0.134) 3.0 (0.118) (2.4 (0.094)) 2.1 (0.083) 1.7 (0.067) 0.9 (0.035)0.7 (0.028) 4?1 0.1 (0.004) typ 1.1 (0.043) 3.3 (0.130) 3.7 (0.146) 0.5 (0.020) 0.12 (0.005) 0.18 (0.007) 0.4 (0.016) 0.6 (0.024) c a circuit diagram c a l s g t676 led super red green package cathode: pin 1 cathode: pin 3
2012-04-20 10 lsg t676 gurtung / polarit?t und lage 8) seite 16 verpackungseinheit 2000/rolle, ?180 mm oder 8000/rolle, ?330 mm method of taping / polarity and orientation 8) page 16 packing unit 2000/reel, ?180 mm or 8000/reel, ?330 mm ohay0093 4 (0.157) 2.9 (0.114) 1.5 (0.059) 4 (0.157) 3.6 (0.142) 3.5 (0.138) 2 (0.079) 1.75 (0.069) 8 (0.315) c a a c
lsg t676 2012-04-20 11 empfohlenes l?tpaddesign 8) seite 16 ir reflow l?ten recommended solder pad 8) page 16 ir reflow soldering empfohlenes l?tpaddesign 8) seite 16 wellenl?ten (ttw) recommended solder pad 8) page 16 ttw soldering ohlpy439 padgeometrie frverbesserte w?rmeableitung improved heat dissipation paddesign for l?tstoplacksolder resist 1.1 (0.043) 4.5 (0.177) 1.5 (0.059) 2.6 (0.102) 3.3 (0.130) 0.5 (0.020) 7.5 (0.295) 0.4 (0.016) cathode marking kathoden markierung / cu fl?che / 12 mm per pad 2 cu-area _ < 3.3 (0.130) ohay0583 6.1 (0.240) 2.8 (0.110) 2 (0.079) 3 (0.118) 6 (0.236) 3.5 (0.138) 1.5 (0.059) 2 (0.079) 3.5 (0.138) 1 (0.039) 8 (0.315) 2.8 (0.110) 0.5 (0.020) 7.5 (0.295) solder resist l?tstoplack pcb-direction bewegungsrichtungder platine 2 (0.079) padgeometrie frimproved heat dissipation verbesserte w?rmeableitungpaddesign for 2 cu fl?che / > 12 mm per padcu-area
2012-04-20 12 lsg t676 l?tbedingungen vorbehandlung nach jedec level 2 soldering conditions preconditioning acc. to jedec level 2 reflow l?tprofil fr bleifreies l?ten (nach j-std-020d.01) reflow soldering profile for lead free soldering (acc. to j-std-020d.01) 0 0 s oha04525 50 100 150 200 250 300 50 100 150 200 250 300 t t ?c s t t p t t p 240 ?c 217 ?c 245 ?c 25 ?c l oha04612 profil-charakteristikprofile feature ramp-up rate to preheat* ) 25 c to 150 c 2 3 k/s time t s t smin to t smax t s t l t p t l t p 100 120 60 10 20 30 80 100 217 2 3 245 260 3 6 time25 c to t p time within 5 c of the specified peaktemperature t p - 5 k ramp-down rate*t p to 100 c all temperatures refer to the center of the package, measured on the top of the component* slope calculation d t/ d t: d t max. 5 s; fulfillment for the whole t-range ramp-up rate to peak* ) t smax to t p liquidus temperaturepeak temperature time above liquidus temperature symbolsymbol einheitunit pb-free (snagcu) assembly minimum maximum recommendation k/sk/s s ss s c c 480
lsg t676 2012-04-20 13 barcode-produkt-etikett (bpl) barcode-product-label (bpl) gurtverpackung tape and reel tape dimensions in mm (inch) w p 0 p 1 p 2 d 0 e f 4 0.1 (0.157 0.004) 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) 1.5 + 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 3.5 0.05 (0.138 0.002) reel dimensions in mm (inch) a w n min w 1 w 2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) sample oha22043 (g) group: lot number (1t) lot no: (9d) d/c: date code (x) prod no: product code (6p) batch no: batch number lxx xxxx product name rohs compliant bin1: bin information color 1bin2: bin information color 2 bin3: ml2 temp st245 c rt additional text r077 demy packvar: packing type product quantity per reel (q)qty: semiconductors osram opto wavelength group forward voltage group brightness group x-x-x+x-x-x color 1 color 2 bar code bar code bar code d 0 2 p p 0 1 p w f e direction of unreeling n w 1 2 w a ohay0324 label gurtvorlauf: leader: trailer: gurtende: 13.0 direction of unreeling 0.25 160 mm 160 mm 400 mm 400 mm 8 + 0.3 C 0.1
2012-04-20 14 lsg t676 trockenverpackung und materialien dry packing process and materials anm.: feuchteempfindliche produkte sind verpackt in einem trockenbeutel zusammen mit einem trockenmitte l und einer feuchteindikatorkarte bezglich trockenverpackung finden sie weitere hinw eise im internet und in unserem short form catalog im kapitel gurtung und verpackung unter dem punkt t rockenverpackung. hier sind normenbezge, unter anderem ein auszug der jedec-norm, enthalten. note: moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. regarding dry pack you will find further informatio n in the internet and in the short form catalog in chapter tape and reel under the topic dry pack. here yo u will also find the normative references like jede c. kartonverpackung und materialien transportation packing and materials oha00539 osr am moisture-sensitive label or print barcode label desiccant humidity indicator barcode label osr a m please check the hic immidiately after bag opening. discard if circles overrun. avoid metal contact. wet do not eat. comparator check dot parts still adequately dry. examine units, if necessary examine units, if necessary 5% 15% 10% bake units bake units if wet, change desiccant if wet, humidity indicator mil-i-8835 if wet, mo i s t u r e leve l 3 f lo o r t ime 1 68 h o u r s m o i s ture l e vel 6 f l o or ti m e 6 h o urs a) h u m i d i t y i ndic a t o r c a r d i s > 10% w h e n r e a d at 2 3 ? c 5 ? c , o r r e f lo w , v a p o r - pha s e reflow , o r e q uiv a l e n t p r o c es s i n g (p eak p a c k a g e 2 . a f ter t h i s bag is o p en e d , d e v i c e s th a t w i l l b e s u b j e cte d t o in f ra r e d 1. s h e l f l ife i n s e al e d b a g : 2 4 mo n ths a t < 4 0 ? c a n d < 90 % r e l a t i v e humidi t y ( r h). mo i s t u r e l e v e l 5a a t f a cto r y con d i t i on s o f ( i f b la nk, sea l d a te i s i d e n t i c al wit h d a t e c o d e). a ) mo u n ted wi t h i n b ) s t o r e d at body te m p . 3 . d e v ic e s r equ i r e b a k ing , b e f ore m o u n ti n g , if : b a g seal da t e m o i s t u r e l evel 1 m o i s ture l e ve l 2 mo i s t u re l e v e l 2 a 4 . i f b aking is re q uir e d , b ) 2a or 2b is n o t me t. d a t e and time o p e n e d : re f e r e n c e ipc / j e d e c j -st d -033 f o r b a k e p r o c e du r e . floo r ti m e s e e b e l o w i f b l a n k , s e e ba r c o d e l a be l fl o o r t ime > 1 yea r floor time 1 y e a r f l o o r t i m e 4 we e k s 1 0 % rh . _ < m o i s tu r e l evel 4 m o is t ure l e v e l 5 ? c ) . op t o s em i c o ndu ctors moi st u re s e n s i t i v e t h i s b ag c o nt a in s c a u t i o n f l o o r t i me 7 2 h ou r s f l o o r time 48 ho u r s flo o r t i m e 2 4 h o u r s 3 0 ? c / 6 0% r h. _ < l e v e l if bl a nk, s ee bar co d e la b e l oha02044 packvar: r077 additional text p -1 + q - 1 m u l t i to p le d muster o s ram o pt o se m i c ond u c t o r s (6p) batch no: (x) prod no : 1 0 (9d) d/c: 11 (1t) lo t no : 2 1 0 0 2 1 9 98 123gh 1 2 3 4 0 2 4 5 (q)qty : 20 0 0 014 4 (g) group: 260 c rt 240 c r 3 220 c r ml bin3: bin2: q-1-20 bin1: p-1-20 l s y t 67 6 2 2a temp st r18 de my p a c k v a r: r0 77 a dd i ti o na l t e x t p-1 + q -1 multi to p l ed muster o s r a m o p t o se m ico nd u ctor s ( 6p ) b a tch no : ( x ) p r od no: 1 0 ( 9 d) d /c: 11 ( 1 t ) l o t n o: 21 0 0 21 9 98 1 2 3 g h 123 4 0 24 5 ( q ) qty : 200 0 0 14 4 ( g ) g r o up : 2 6 0 c r t 2 40 c r 3 2 20 c r m l b i n 3 : b i n2 : q- 1 - 2 0 b i n 1: p -1-20 l s y t 6 76 22 a te m p st r18 d e m y o s r a m packing sealing label barcode label m o is ture l eve l 3 floor time 16 8 h o u rs mois t ure l e ve l 6 f loor t i m e 6 h o urs a ) humidi t y i n di ca t o r card i s > 10% w h en re ad a t 2 3 ?c 5 ?c , or re f l o w , v a p or-phase reflow, o r e qu i val e nt proces s i ng (p e a k p a ckag e 2 . a f t e r t hi s bag is o p e n e d , d e v i ces t h at w ill b e sub j e c te d to inf r ar e d 1 . sh e lf l if e in sea l ed ba g : 2 4 m onths at < 4 0 ?c a n d < 9 0 % re lati v e hu mi d i t y (r h) . mo i st u re le v e l 5 a a t f a c t o r y c on d iti o ns of (if b l a n k , se al d a t e is i de n t i cal w it h da t e co d e). a) m o un ted w i thin b) st o red a t b o dy t e m p. 3. d evices re q ui r e b a ki n g , befo re m o u n t i n g, i f : b a g s e a l d a t e m oist u re le ve l 1 mo i st u re l e ve l 2 mois t ure l e vel 2 a 4. i f b aking is r e q u i re d , b ) 2 a o r 2 b i s n o t me t. d at e a nd time op e ned: ref e ren c e i pc / j ed ec j-std - 033 f o r b a ke pr o cedure. f l oo r t ime se e b e lo w if blan k , s e e ba r co d e l a b e l floor tim e > 1 y e a r f l o o r t ime 1 year f loor t ime 4 w e e ks 10% r h. _ < moi s ture leve l 4 mo i s t u re le v e l 5 ?c ) . opto se m ico n du ct ors mo i sture sen s i ti v e t h i s bag c o n ta i n s cau t io n floor time 72 h o u rs f l o o r t i me 4 8 hours f l o or t i me 2 4 h o ur s 30 ?c / 6 0 % rh . _ < le vel if b l a n k , s e e bar co d e la b e l barcode label
lsg t676 2012-04-20 15 attention please! the information describes the type of component and shall not be considered as assured characteristics . terms of delivery and rights to change design reser ved. due to technical requirements components may c ontain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest ve rsion in the internet. packing please use the recycling operators known to you. we can also help you C get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport . for packing material that is returned to us unsorted or which w e are not obliged to accept, we shall have to invoi ce you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 9) page 16 may only be used in life-support devices or system s 10) page 16 with the express written approval of osram os. revision history: 2012-04-20 previous version: 2012-01-05 page subjects (major changes since last revision) date of change 2 new brightness grouping for super-red and green 200 5-07-12 2 new ordering code 2005-07-27 7 dimming diagramm changed acc. to os-in-2006-028 200 6-10-16 1, 9 additional information 2010-03-02 2, 5 ordering code changed 2012-01-05 12 os-in-2012-005 2012-04-20
lsg t676 2012-04-20 16 fu?noten: 1) helligkeitswerte werden mit einer stromeinpr?gedauer von 25 ms und einer genauigkeit von 11% ermittelt. 2) wegen der besonderen prozessbedingungen bei der herstellung von led k?nnen typische oder abgeleitet e technische parameter nur aufgrund statistischer werte wiedergegeben werden. diese stimmen nicht notwendigerweise mit den werten jedes einzelnen produktes berein, dessen werte sich von typischen und abgeleiteten werten oder typischen kennlinien unterscheiden k?nnen. falls erforderlich, z.b. aufgrund technischer verbesserungen, werden diese typischen werte ohne weitere ankndigung ge?ndert. 3) die led kann kurzzeitig in sperrichtung betrieben werden. 4) r thja ergibt sich bei montage auf pc-board fr 4 (padgr??e 3 16 mm 2 je pad) 5) wellenl?ngen werden mit einer stromeinpr?gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt . 6) spannungswerte werden mit einer stromeinpr?gedauer von 1 ms und einer genauigkeit von 0,1 v ermittelt. 7) im gestrichelten bereich der kennlinien muss mit erh?hten helligkeitsunterschieden zwischen leuchtdioden innerhalb einer verpackungseinheit gerechnet werden 8) ma?e werden wie folgt angegeben: mm (inch). 9) ein kritisches bauteil ist ein bauteil, das in lebenserhaltenden apparaten oder systemen eingesetzt wird und dessen defekt voraussichtlich z u einer fehlfunktion dieses lebenserhaltenden apparates oder systems fhren wird oder die sicherheit oder effektivit?t dieses apparates oder systems beeintr?chtigt. 10) lebenserhaltende apparate oder systeme sind fr (a) die implantierung in den menschlichen k?rper oder (b) fr die lebenserhaltung bestimmt. falls sie versagen, kann davon ausgegangen werden, dass die gesundheit und das leben des patienten in gefahr ist. published by osram opto semiconductors gmbh wernerwerkstrasse 2, d-93049 regensburg www.osram-os.com ? all rights reserved. remarks: 1) brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) due to the special conditions of the manufacturing processes of led, the typical data or calculated correlations of technical parameters can only refle ct statistical figures. these do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data a nd calculated correlations or the typical characterist ic line. if requested, e.g. because of technical improvements, these typ. data will be changed witho ut any further notice. 3) driving the led in reverse direction is suitable fo r short term application. 4) r thja results from mounting on pc board fr 4 (pad size 3 16 mm 2 per pad). 5) wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 6) forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 v. 7) in the range where the line of the graph is broken, you must expect higher brightness differences between single leds within one packing unit. 8) dimensions are specified as follows: mm (inch). 9) a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its saf ety or the effectiveness of that device or system. 10) life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human li fe. if they fail, it is reasonable to assume that the h ealth and the life of the user may be endangered.

▲Up To Search▲

Price & Availability of LSGT676-P7R-1N7P9-24

	To Download LSGT676-P7R-1N7P9-24 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .